|
Description and Application
The LANmark-OF Tight buffer Indoor has 900 um buffered fibres. This second coating till 900 um provides additional protection of the fibres and facilitates the handling when terminating the fibres in a patch panel. The easy strip tight buffer design allows stripping the fibre over 10 cm in one action.
The LANmark-OF Tight buffer Indoor is most suitable for direct termination by either anaerobic or hot melt connectors. The tight buffered fibres can also be terminated with splicing of pigtails.
The dry structure of the LANmark-Of Tight Buffer Indoor allows both vertical and horizontal installations. It complies with the indoor fire requirements. The cables can also be installed in a duct by pulling.
Construction
Legend accompanying the cross section drawing:
- Outer sheath in LSZH material
- Aramid Yarns
- Optical fibre (900 um)
- Central Strength element (not for 2 fibres)
Characteristics
- Designed for direct termination and splicing
- Indoor cable for horizontal and vertical installations
- Dielectric design
- Flame retardant (IEC 60332-1 and NFC 32070-C2)
- Fire retardant (IEC 60332-3 and NFC 32070-C1)
- Aramid yarns for ease of handling and as strength element
- Available in all fibre grades
- Available till 24 fibres
|
